Nicely done Keiron, what kind of finish have you put on the wood?
looks like oil or wax. gives a nice sheen rather than a gloss whatever it is.
Nicely done Keiron, what kind of finish have you put on the wood?
looks like oil or wax. gives a nice sheen rather than a gloss whatever it is.
Location: Napier, New Zealand
Posts: 1,519
I'm Andrei.
One of the cooler looking 1200s around!
What veneer / polish have you used?
[COLOR=#a52a2a][B]Sources:[/B] [B]1[/B][/COLOR] PC & Wyred4Sound DAC-2 DSDse [COLOR=#a52a2a][B]2[/B][/COLOR] Oppo BDP105 [COLOR=#a52a2a][B]3[/B][/COLOR] Technics SL·1210 MK5 (Jelco 750D · Benz Wood). [COLOR=#a52a2a][B]Speaker Cable[/B][/COLOR] [COLOR=black]Nordost Frey.[/COLOR] [COLOR=#a52a2a][B]Interconnects [/B][/COLOR][COLOR=#000000]Oyaide[/COLOR][COLOR=black] & [/COLOR][COLOR=#000000]Geisha [/COLOR][COLOR=black]Silver.
[/COLOR][B][COLOR=#a52a2a]Phono Stage [/COLOR][/B][COLOR=black]Fosgate Signature V2. [/COLOR] [COLOR=#a52a2a][B]Preamp [/B][/COLOR][COLOR=#000000]Ayon Eris[/COLOR][COLOR=black]. [/COLOR] [COLOR=#a52a2a][B]Power Amp[/B][/COLOR] [COLOR=Black]ATC P1. [/COLOR] [COLOR=#a52a2a][B]Speakers[/B][/COLOR] Triangle Magellan Cello. [COLOR=#A9A9A9]Oh Sting, where is thy death?[/COLOR]
Good effort, Keiron. It's been a while since I ran an SME III - can't say I've ever seen one on a Technics. Looks nice.
Thanks for the kind words. It's a dark walnut (not as dark as I'd hoped) and finished in Danish oil. It's a tad patchy to be honest - I'll give it another 'scrub' at some point to even the finish out.
It actually still incorporates the original plinth. I simply bolted 4 pieces of MDF around the edge and filled the gaps. It still uses the same rubber chassis.
It has a Paul Hynes external PSU (it came like that when I bought it).
The change is purely cosmetic. Sticking these bits on has made absolutely no difference to the sound. But admittedly you could probably take it away and replace it with a Steepletone and I wouldn't hear the difference, so cloth-like are my ears
And finally I got my hands on a 1210mk5G My good friend had this, and has excactly the same upgrades as my 1210mk2. Mike New Bearing was the last upgrade that we did last week. He wanted a Rega P9. Can you belive that
The mk5G looks so much better than the mk2, too. The future upgrades would be Mike New ETP Platter and maybe change the arm. But I will keep it as it is for some time now. It's been upgraded from scratch the last 6 months:
- Isonoe feet.
- Achromat 1200 Funkplatter
- Rek-O-Kut record weight
- KAB rewired Cardas arm.
- KAB Fluid Damper
- KAB pcb card
- Cardas Litz phono wire
- Mains Cables R us PSU with regulator
- Sumiko HS-12
- Denon DL-103
- Isokinect 103 Stabilizer
- 22 gram aux weight
- Mike New Bearing
And I must say. With the DL-103 it sounds just great!!!
Last edited by ChrisKemp; 30-04-2014 at 19:20.
Turntable 1: Technics SL1210M5G/ KAB PSU/ KAB Fluid Damper
Turntable 2: Rega P3 (new) Tangospinner & dual belt/ Rega Neo
Amplifier: Rega Elex-R
RIAA: Rega Fono mk3 & Schiit Mani
Speaker: Klipsch RP280f
Cartridge: Rega Exact & Nagaoka MP-110
A half bad pic of my beloved 1210 with Ortofon 2M Bronze
Speakers: Sonus Faber Extrema
Pre: Cary SLP-03
DAC: Arcam irDAC
Power: Krell KSA 300s
Sources: SB Touch, Theta Jade, Technics SL1210 mk2 (KAB/Cardas/Funk Firm/Isonoe)
Cartridge: Ortofon Cadenza Blue, 2M Bronze, Denon DL 103
RIAA: ASR Mini Basis mk2
Just to keep the evolution of my deck in one place.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Location: Prescott, AZ USA
Posts: 120
I'm Chris.
Location: Eastern, US
Posts: 1,869
I'm afesteringvinylphile.
Lyrics are the ramblings of man, sometimes inspired by The Creator, most often, not.
But music (melodies, harmonies, rhythms), that's God stuff.
Always was. Always will be.
One of the biggest lies ever told was that only certain kinds of people should listen to certain kinds of music.
(silent) VINYL LP SLIDESHOWS
Spot the difference.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..