+ Reply to Thread
Page 22 of 24 FirstFirst ... 122021222324 LastLast
Results 211 to 220 of 232

Thread: Magna Audio News & Product Updates

  1. #211
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    8 turned brass feet for a couple of big amplifiers. These are 50mm diameter turned from solid brass. Ready to fit.

    .





    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  2. #212
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default Heavyweight ebony record puck on customer's deck

    Here's a pic of the heavyweight ebony puck I recently made. Pictured on the customer's lovely turntable.



    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  3. #213
    Join Date: Oct 2011

    Location: London Town

    Posts: 2,108
    I'm Julian.

    Default

    Looks stunning on that deck Steve. Absolute craftsmanship.
    The Source - Kuzma Stogi - AT33 PTG/II - Fidelity Research FRT-3 - Conrad-Johnson EV-1 - Consonance Cyber 222 mk2 - Philips DC380 - Shanling CD-S 100 MK 11 - Toshiba ST-420 - Tannoy Chatsworths

  4. #214
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    Thanks!
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  5. #215
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    Tannoy GRF replica's on the go.

    These are made from premium quality 21mm thick birch plywood throughout.
    The taller narrower footprint to my own design makes fitting them in normal sized rooms much easier.
    They retain the same volume and back loaded horn design (computer modelled) as the standard rectangular GRF cabinets.

    The vastly better construction materials vs the originals make for a sublime sound.

    Birch plywood cut and machined to very high precision.

    Prepped to very fine finish.





    More to follow
    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  6. #216
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    Under construction

    Front baffles first. Internal baffles and tear drop baffle in.









    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  7. #217
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    Coming along nicely.
    All felted and removable rear / inner panel braced.

    Next up plinth, full length black grilles, crossover upgrade, fitting and finishing.







    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  8. #218
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    I've also been busy with armboards.

    The ever popular ebony for Technics SL-1210 and SME arm.

    In reverse order of construction.



















    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  9. #219
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default Latest armpod. Off to the Netherlands.

    This one is a 7kg heavyweight!
    Usual ebony armboard and also an ebony base this time.

    Jelco armbase fitting. The height adjustable feet have felt pads this time.

















    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

  10. #220
    Join Date: Mar 2009

    Location: The New Forest

    Posts: 1,154
    I'm Steve.

    Default

    Here's another Mikro Seiki AX-4G armboard in solid ebony.
    SME fitting with threaded inserts to take the armbase bolts.
    Bronze bush to clamp to the armboard pillar.
    Extra thick at the armbase end. You can't have too much lovely sounding ebony..

    Pictured here with the old metal armboard as a stand









    System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Digital CD spinner, Serious USB->I2S streaming, ADC / DSP XO / Pre / 4 DAC's : WAF Najda, Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.

    Maker of counterweights, tonearm boards, Tannoy GRF style speaker cabinets, horn speakers and more.
    For more information about my creations and products please click below

    http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/

+ Reply to Thread
Page 22 of 24 FirstFirst ... 122021222324 LastLast



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •