I thought there was a sticky thread, but can't find it now.
Location: gone
Posts: 11,519
I'm gone.
I thought there was a sticky thread, but can't find it now.
.
Location: Devon
Posts: 1,903
I'm stu.
Goldring did a very nice job on the koetsu i'am using.
Dom at http://northwestanalogue.weebly.com/ is great.
TT 1 Trans-Fi Salvation with magnetic bearing + Trans-Fi Terminator T3Pro + London Reference
TT 2 Garrard 301 with NWA main bearing + Audiomods Series Six 10.5" + Ortofon 2M Mono SE
Digital Lindemann Bridge + Gustard R26 with LB external clock
Pre and Power Amp EWA M40P + M40A
Bass Amp & DSP Behringer iNuke NU3000DSP x 2
Speakers 1 Bastanis Sagarmatha Duo with twin baffleless 15" bass drivers per side
Speakers 2 MarkaudioSota Viotti Tower
Soundsmith if you are patient
I'd love to see some actual data on who is the best. Who gets the most solid bonding of stylus to canti, closest to the original tip mass, most accurate alignment, greatest lifespan after re-tipping, all that jazz.
Kuzma Stabi/S 12", (LP12-bastard) DC motor and optical tacho psu, Benz LP, Paradise (phonostage). MB-Pro, Brooklyn dac and psu, Bruno Putzeys balanced pre, mod86p dual mono amps, Yamaha NS1000m
Location: glasgow
Posts: 1,508
I'm scott.
Dom from northwest , len @ the cartridgeman , soundsmith , goldring , ESC
( in no order )
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
If you only played jap vinyl, I suspect your request would be the other way round
I'd recommend EsCo if you can wait and I've used them myself in the past, since they can do almost anything to cartridges, rebuilds etc., as well as manufacturing OEM styli, grafting broken cantilevers and fitting new diamonds on to existing good cantilevers. I understand that many styli come redy bonded to cantilevers, only needing trimming and carefully bonding to the coils/magnet. This does save a lot of hassle..
Tear down these walls; Cut the ties that held me
Crying out at the top of my voice; Tell me now if you can hear me
Plus 1 more for EsCo.
I've had a couple of 103's that they built for me. Well worth the wait
Ian
http://www.hifisounds.co.uk
Photo bucket - loads of mods!
SL1200- DIY PSU- DIY FET int regs-Denon DL103 by Expert Stylus Company on Isokenetic stabiliser & Sumiko HS-12 shell- Achromat - Isonoe feet, Meridian 200 Phono satge, Junson JA-88D, Audio Aero Capitole CD/ DAC, extreme modified Marantz SA7001, Squeezebox Touch modded to death!, Focal 826WSE- Kimber 8TC, Kimber and CAT5 attenuated DIY Interconnects, Kimber mains
"Leave Nothing as Standard"
Is there an internet link for EsCo - Google is not coming up with anything?