+ Reply to Thread
Page 34 of 34 FirstFirst ... 24323334
Results 331 to 336 of 336

Thread: Garrard 301 restoration project

  1. #331
    Join Date: Jan 2010

    Location: Seattle, WA

    Posts: 271
    I'm Mikkel.

    Default

    Quote Originally Posted by REXTON View Post
    That's why you need the shims!
    I thought that might be the case. But, does the platter have enough overhang for the sensor to be able to get close enough to it? Does that question make sense?

  2. #332
    Join Date: Jan 2010

    Location: Seattle, WA

    Posts: 271
    I'm Mikkel.

    Default

    Quote Originally Posted by REXTON View Post
    Look at the pictures in post #278 to see how I mounted the PCB which comes with the Pheonix. It dosen't look pretty but it works, I suppose I should mount it under the platter.
    Wil do. Under, is the other option I'm contemplating, wiring in from under and all.

  3. #333
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 6,407
    I'm AnDreW.

    Default

    Been a little while since I updated this thread. I now have a little bamboo isolation project on the go. The results from my other two experiments with my lenco and 1210 have brought very nice improvements for the outlay so I thought why not! It'll be a while before I get round to making the board so stay tuned.
    SS CD Teac VRDS25X(Mega Modded) DAC Caiman SEG+Anker PSU DECK 1210 Mat Analouge Studio Crystal Mods MN Base/Bearing/Platter+Ebony arm Board Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/Jaeger(low-impedance) connector/3 StageRegs/Recapped PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MCOrtofon Cadenza Black CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    Valve PRECroft Epoch(Mega Modded) AMP Sondex S100 SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Reference XO DECK Garrard301 MatTeunto GunMetal Bearing401 PlinthMoldovan Arm SME 3012(Ikeda Ag wired) PSUPheonix PSU+Tachomter MCAg Meister SPU/DECCA Maroon CABLESArm Yannis 420.5 Litz+ Speaker3mm2Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostage4Box Paradise


  4. #334
    Join Date: Jan 2009

    Location: Essex

    Posts: 15,124
    I'm openingabottleofwine.

    Default

    Five and a half years down the road, how close do you think you are now to completion?

    Or is it a bit of a Sisyphean project?
    Have you listened to this month's choice in the Album Club?

    Barry

  5. #335
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 6,407
    I'm AnDreW.

    Default

    Quote Originally Posted by Barry View Post
    Five and a half years down the road, how close do you think you are now to completion?

    Or is it a bit of a Sisyphean project?
    I'd say that the vast majority (90%) of the deck is complete but there is always something which can be tweaked. I've actually left the 301 in a pretty much vanilla state and not done very many of the mods published. I've a 401 bearing runnning instead of the 301 but that's because I think the 401 bearing is a better than the 301. I've never been a big fan of after market 301 mods as I think this actually then stops the deck being a 301. I'm also have no intenttion of buying these mods due to lack of evidence with respects to any sonic benefits, the dubious nature of some designs and the stupidly high prices that the vast majority of these mods are commanding. So I wouldn't call my task Sisyphean. In some repects the 301 is the boulder that Sisyphus was comdemned to roll but only because there will always be new carts, new platter mats, new tonearms and it's in these areas that I'll probably be tweaking. I do intend at some stage have another look at the 301 and implement some of the tweaks I learned from the Lenco but this will probably be over Summer. Stay tuned.
    SS CD Teac VRDS25X(Mega Modded) DAC Caiman SEG+Anker PSU DECK 1210 Mat Analouge Studio Crystal Mods MN Base/Bearing/Platter+Ebony arm Board Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/Jaeger(low-impedance) connector/3 StageRegs/Recapped PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MCOrtofon Cadenza Black CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    Valve PRECroft Epoch(Mega Modded) AMP Sondex S100 SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Reference XO DECK Garrard301 MatTeunto GunMetal Bearing401 PlinthMoldovan Arm SME 3012(Ikeda Ag wired) PSUPheonix PSU+Tachomter MCAg Meister SPU/DECCA Maroon CABLESArm Yannis 420.5 Litz+ Speaker3mm2Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostage4Box Paradise


  6. #336
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 6,407
    I'm AnDreW.

    Default

    Garrard Project Part I - Slow boat from China.

    I order a load of stuff from China mainly because its cheap and it usually works very well and my favourite spikes for isolation boards happen to hail from China. This latest set cost 20, I laugh when I see similar products in this country advertised at several hundred pounds the only downside to being a tight arse is the delivery time which is usually several weeks. This project has been rolling on for 5 1/2 years so a few weeks is nothing . I managed to source a bamboo board which perfectly matches the footprint of my 301 but is about 10mm thinner than my other experimental attempts, this should be interesting. Stay tuned when I should hopefully have some nice new piccies for the next update.
    SS CD Teac VRDS25X(Mega Modded) DAC Caiman SEG+Anker PSU DECK 1210 Mat Analouge Studio Crystal Mods MN Base/Bearing/Platter+Ebony arm Board Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/Jaeger(low-impedance) connector/3 StageRegs/Recapped PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MCOrtofon Cadenza Black CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    Valve PRECroft Epoch(Mega Modded) AMP Sondex S100 SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Reference XO DECK Garrard301 MatTeunto GunMetal Bearing401 PlinthMoldovan Arm SME 3012(Ikeda Ag wired) PSUPheonix PSU+Tachomter MCAg Meister SPU/DECCA Maroon CABLESArm Yannis 420.5 Litz+ Speaker3mm2Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostage4Box Paradise


+ Reply to Thread
Page 34 of 34 FirstFirst ... 24323334



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •