+ Reply to Thread
Page 2 of 1778 FirstFirst 123412521025021002 ... LastLast
Results 11 to 20 of 17771

Thread: Three Words Daily (Or whenever you like)

  1. #11
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,387
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    with arse gravy
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  2. #12
    Join Date: May 2011

    Location: England

    Posts: 614
    I'm Mark.

    Default

    on yorkshire puddings

  3. #13
    Join Date: May 2010

    Location: Weymouth, Dorset.

    Posts: 2,452
    I'm John.

    Default

    yummy, more please!

  4. #14
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,387
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    and some quim-jelly!
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  5. #15
    Join Date: Jun 2009

    Location: Sunny West Sussex

    Posts: 3,866
    I'm InUpToMyNutsDeepMostNights.

    Default

    pass the spoon
    Jon


    A person who never made a mistake never tried anything new.





    Den Set up
    Scratch built Loftin White 2A3 SE Valve lovleyness , Tannoy Sterlings, Garrard 301 , SME 3012 , Ortofon SPU

    My birds house
    Audio note Zero mono blocks, Audio note M1 pre , Puresound P10 and matching SUT , Denon 103r , Audio note AZ2 speakers, gaitered Stan dac, Lenco GL 75 , Apple TV

  6. #16
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,387
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Look-out for lumps!
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  7. #17
    Join Date: Jun 2009

    Location: Sunny West Sussex

    Posts: 3,866
    I'm InUpToMyNutsDeepMostNights.

    Default

    of creamy Knob-snot
    Jon


    A person who never made a mistake never tried anything new.





    Den Set up
    Scratch built Loftin White 2A3 SE Valve lovleyness , Tannoy Sterlings, Garrard 301 , SME 3012 , Ortofon SPU

    My birds house
    Audio note Zero mono blocks, Audio note M1 pre , Puresound P10 and matching SUT , Denon 103r , Audio note AZ2 speakers, gaitered Stan dac, Lenco GL 75 , Apple TV

  8. #18
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,387
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    jostling for domimance
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

  9. #19
    Join Date: Jun 2009

    Location: Sunny West Sussex

    Posts: 3,866
    I'm InUpToMyNutsDeepMostNights.

    Default

    dressed in leather
    Jon


    A person who never made a mistake never tried anything new.





    Den Set up
    Scratch built Loftin White 2A3 SE Valve lovleyness , Tannoy Sterlings, Garrard 301 , SME 3012 , Ortofon SPU

    My birds house
    Audio note Zero mono blocks, Audio note M1 pre , Puresound P10 and matching SUT , Denon 103r , Audio note AZ2 speakers, gaitered Stan dac, Lenco GL 75 , Apple TV

  10. #20
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 69,387
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    and 'Jesus sandles'
    "A man is a success if he gets up in the morning and gets to bed at night, and in between he does what he wants to do". - Milan Kundera.

    "Your validity or worth are not defined or determined by the views of others with their own superimposed agendas". - Pharos (on AoS)

    My system:

    Modified Technics SL-1210MK5G/Mike New high-precision bearing & baseplate/Mike New ETP platter/Bruil record weight/Nagaoka GL602 crystal T/T mat. Paul Hynes SR7EHD PSU (plus regulator modules)/DCSXL pure-silver DC lead. Ortofon RS-212D tonearm/'Speedy Steve' custom-made Ebony armboard. Yannis Tome 423.5 Phono Silver-Litz tonearm cable, with Furutech CF-DIN(R) and Eichmann silver Bullet Plugs. Cartridges: Denon DL-S1 in AT MG-10 headshell with AT-6106 Quattro Hybrid lead-wire. Denon DL-103C1 in '103U' headshell with AT-609 silver lead-wire. Vintage Denon DL-103AU in AT-Ti15ANV Titanium Headshell. Shure M55E in Denon PCL-300 headshell with 6N silver lead-wire. Shure original USA SC35C. Audiocom-modified Sony X-777ES/DAS-R1 transport/DAC. Raspberry Pi-3 Model B and IQaudio Pi-DAC+/Paul Hynes SR3DR-05 linear PSU/Williams Audio NAS linear PSU. Heavily-modified Croft Charisma-X preamp. Stereo Coffee LDR. Head-amp: Paul Hynes design/SR5 PSU. Also modified Lentek. Tube Distinctions 50W Class A P/P Copper amp with cryo-treated Tung Sol KT150s. Speakers: 'Lockwood Majors', using 15" Tannoy Monitor Golds, modified with bespoke crossovers. Also Celestion Ditton 15XRs. Stands: Mana Acoustics (non-magnetic stainless steel 'clones’). Hi-Fi Racks Podium T/T wall shelf. Sony ST-5055L tuner. Cables: Furukawa EE/F-S 2mm & 2.6mm solid-core mains leads, fitted with Furutech FI-50 IECs and FI-1363Rs. Stereo interconnects: Sommer Carbokab 225 (with silver-plated MS Audio non-metallic POM RCAs). Speaker cable: VDH 'The Wind' Hybrid II. Digital coaxial cable: 1m Trompeter Electronics Triax TRC-75-2, with MS Audio ‘Starline' silver-plated RCAs. Mains block: Mark Grant 6-way, modded with Furutech FP-1363R sockets and Furukawa cable. Tube Distinctions digital noise filter. VPI HW 16.5 record cleaner.

+ Reply to Thread



 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •