Posts: 505
Posts: 505
Been Running this valve amp all day with Croft Pre amp..Bass responce is ripping my guts out to say the least....Problems..It's too much for me & the moaning wife...
Interesting looking amp!
What make KT88's are you using? Best I've tied so far are probably Svetlana's, I'm using some Gold Lion reissues ATM but I don't think they're as good as the Svet's, I'll have to swap back sometime soon to check.
I have a spare set of Svet's too if you're interested in trying some?
Cheers,
Mike.
Here's mine in action: (crappy pic though)
http://img255.imageshack.us/img255/4872/p2161339pl6.jpg
Last edited by Mike; 16-02-2008 at 19:57.
yUM yUM That looks really tasty
Mike,
Looks nice.
Do you find the valve damping rings make much difference?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Posts: 505
I think '6550' toobs might be in order.Or buy a pair of 'JR149's...I could do with a small pair of proper speeks anyway considering my surcumstances....What a farking life i got eh!.
Yes... and no
The EAT Cool Dampers make a big difference on the small signal valves, as did Pearl valve coolers, but they looked gash.
The Golden Dragon dampers on the 88's don't seem to do much on those particular tubes, they are very solidly built with pretty thick glass and don't seem at all microphonic. They're much more effective on more, err, 'flimsy' stuff.
The biggest improvement of all was changing the feet for RDC2 cones and RDC cups, Nordost Pulsar Points worked well too. This could mean nothing more than I have a crap rack though!
Cheers,
Mike.
Posts: 505