+ Reply to Thread
Results 1 to 10 of 10

Thread: Nick G's OTL headphone amp design

  1. #1
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default Nick G's OTL headphone amp design

    I'm currently listening to Nick's prototype, the design of which is featured on the Hi-fi Collective site below:

    http://www.hificollective.co.uk/pdf/otl_head.pdf

    It sounds absolutely superb, and one of the finest headphone amplifiers I've ever had the pleasure to listen to! I intend to have one built myself and put into a smaller case

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  2. #2
    Join Date: Jan 2009

    Location: Essex

    Posts: 32,036
    I'm openingabottleofwine.

    Default

    Quote Originally Posted by Marco View Post
    I'm currently listening to Nick's prototype, the design of which is featured on the Hi-fi Collective site below:

    http://www.hificollective.co.uk/pdf/otl_head.pdf

    It sounds absolutely superb, and one of the finest headphone amplifiers I've ever had the pleasure to listen to! I intend to have one built myself and put into a smaller case

    Marco.
    Like it. Any idea of cost?
    Barry

  3. #3
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    You'd need to speak to Nick, mate, but a ballpark figure would be around £600

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  4. #4
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,535
    I'm David.

    Default

    Looks good
    Tear down these walls; Cut the ties that held me
    Crying out at the top of my voice; Tell me now if you can hear me

  5. #5
    Join Date: Mar 2008

    Location: Galashiels

    Posts: 13,696
    I'm inthescottishmafia.

    Default

    Course it is, Nick designed it! He doesn't let anything less than as good as he can make it, given the cost, out of the door.

  6. #6
    Join Date: Mar 2008

    Location: Halifax, UK

    Posts: 1,399
    I'm Nick.

    Default

    Cash in a brown envelope as usual Ali?

    :-)

    Thanks Marco for posting the link. Its not as complex a build as it may look, its just an unusual shape for those of us used to normal PP and single ended amps. Other than the mains TX its all off the shelf stuff and as long as the setup instructions are followed its simple enough. And once its setup it seems nicely stable in use. The 6080's are only dissipating 5W a triode, so they should last for ages. 6AS7 should also work just fine.
    Nick.

  7. #7
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Thanks Marco for posting the link.
    No worries, dude. It deserves to be seen as it's a fantastic piece of kit!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  8. #8
    Join Date: Mar 2008

    Location: Galashiels

    Posts: 13,696
    I'm inthescottishmafia.

    Default

    Quote Originally Posted by lurcher View Post
    Cash in a brown envelope as usual Ali?

    :-)

    Thanks Marco for posting the link. Its not as complex a build as it may look, its just an unusual shape for those of us used to normal PP and single ended amps. Other than the mains TX its all off the shelf stuff and as long as the setup instructions are followed its simple enough. And once its setup it seems nicely stable in use. The 6080's are only dissipating 5W a triode, so they should last for ages. 6AS7 should also work just fine.

    Yep, that'll do fine Nick!

  9. #9
    Join Date: Mar 2008

    Location: Halifax, UK

    Posts: 1,399
    I'm Nick.

    Default

    Quote Originally Posted by Ali Tait View Post
    Yep, that'll do fine Nick!
    Cool, you know the address to send it to Ali
    Nick.

  10. #10
    Join Date: Mar 2008

    Location: Galashiels

    Posts: 13,696
    I'm inthescottishmafia.

    Default


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •