In case you feel the need to spend a bit more money, I found the imaging of the Berkeleys really improved once I removed the plinths and put them on 8" stands.
https://i.imgur.com/zlw8zq9.jpg
Printable View
In case you feel the need to spend a bit more money, I found the imaging of the Berkeleys really improved once I removed the plinths and put them on 8" stands.
https://i.imgur.com/zlw8zq9.jpg
For my Cheviots, I made 9" MDF stands that the plinths slide down into. Saves tinkering with the speakers and work just fine.
I had my 12” hpd s done a few years ago. New cones and the rubber surrounds.
https://uploads.tapatalk-cdn.com/201...c0eff4474f.jpg
https://uploads.tapatalk-cdn.com/201...a8e1a44f35.jpg
They sounded ok on return but definitely improved over time.
Get them off the ground though, even a couple of breeze blocks will help - best improvement you’ll make
https://uploads.tapatalk-cdn.com/201...967fc033c8.jpg
My stands are black painted MDF.
315s? 12” hpds in Cheviot cabs. they have the hard (is it not rubber?) surrounds in place of the perished foam
They are not HPDs.
These are the Cheviots with HPD 315 drivers. You'll notice that the driver frames are round, they also have Alnico magnets. Yours are what is known as 'quartic' frames, meaning that you have the MK.II Cheviot. Housing the ceramic magnet 3128 drive units.
http://i66.tinypic.com/2a62txy.jpg
The good news, is that to me at least, these sound better than the HPDs. I own a pair and they are amongst the best Tannoys I've ever heard and I've heard near enough all the vintage classics.
The replacement cones in yours appear to have integral surrounds formed from the edge of the cone paper being corrugated and then coated.
Cheers Geoff. They had foam surrounds when I got them but when we went to put the drivers back in the cabs after replacing the wadding and the x-overs, all the foam fell out :(
Here’s the only close up I have https://uploads.tapatalk-cdn.com/201...46bd218486.jpg
They sound bloody good either way [emoji41]
That's how mine looked until I replaced the surrounds.
While I wait for the drivers to return I have my PMC 21's sitting on top of the Berkeley cabs and they are sounding great, ok they're a bit high for ideal tweeter height but I'm still impressed with these little standmounts.