Solder the ends of the litz to a piece of thin stiffish wire and bend its end a bit so that when pushed though it can be waggled to locate the far hole on the side of the tube, then you can draw the whole lot through and then unsolder the litz.
Printable View
Solder the ends of the litz to a piece of thin stiffish wire and bend its end a bit so that when pushed though it can be waggled to locate the far hole on the side of the tube, then you can draw the whole lot through and then unsolder the litz.
i got stuck in today with the rewire,i started with the silver wire but after cutting into 4 lengths 1 didnt have continuity so i ditched that and went with the copper litz.
soldered all the tags first then fished the wires through with a guitar string.
i didn't go for a heavy braid,just a few twists.
https://s26.postimg.org/czxfr2qtl/SDC10767.jpg
https://s26.postimg.org/byx71y9u1/SDC10768.jpg
https://s26.postimg.org/ryfuli5vt/SDC10776.jpg
i think it turned out ok for my first time,relatively easy but fiddly. :)
looks like a nice job jamie... well done
cheers matey :thumbsup:
Very nice mate but you'll regret those cartridge clips, they dont grip well at all from my experience.
Nice tidy job. Look the part, all thats left is to eat your words 😂😂
Sent from my EVA-L09 using Tapatalk
its the earth barry, :)
way too fiddly for me these days. Have a hard enough time just seeing tags now :lol: