Here's some of the latest products
An ebony record weight / puck that is bound for New Zealand
During turning
https://c2.staticflickr.com/1/773/32...73626cde_k.jpg
Finished
https://c3.staticflickr.com/1/630/32...e01f8e16_b.jpg
Next up special turntable feet from blocks of ebony for a Verdier Vintage/Heritage Turntable
https://c3.staticflickr.com/1/695/32...e988de69_h.jpg
Stainless steel inserts for the spiked plinth
https://c3.staticflickr.com/1/738/31...e5d901f8_h.jpg
Finished
https://c1.staticflickr.com/1/524/31...eb38e669_h.jpg
https://c1.staticflickr.com/1/726/31...35c90eff_h.jpg
https://c1.staticflickr.com/1/406/31...7302e994_h.jpg
https://c5.staticflickr.com/1/779/31...dae78dbb_b.jpg
Here's a top hat / flange for a turntable under machining
https://c2.staticflickr.com/1/709/31...e1353813_h.jpg
Lastly a pair of 550Hz horns with Vitavox S2 compression driver fittings.
Turned from soft Redwood pine - this give the best possible sound.
These are off to the Ukraine.
https://c8.staticflickr.com/1/646/31...96f910e0_h.jpg
https://c1.staticflickr.com/1/517/32...4fb1c030_h.jpg
https://c8.staticflickr.com/1/307/32...84fa2ee1_h.jpg
https://c7.staticflickr.com/1/597/31...c30cb2fb_h.jpg
Next up will be more armboards ;)