My Ruark Talisman IIs recommended power handling is 25-100w, I've seen a 150w amp that I'm interested in, I'm guessing it won't be suitable for the Ruarks?
Printable View
My Ruark Talisman IIs recommended power handling is 25-100w, I've seen a 150w amp that I'm interested in, I'm guessing it won't be suitable for the Ruarks?
In my experience, that will be fine. If it were not, amplifiers like the big Krells would be unsaleable as they are beyond the power handling capabilities of any speakers out there.
What amp are you looking at?
I've used 10 watt rated speakers with a 220 watt power amp with no bother. I'd not be concerned Mike.
Just watch the volume control :)
Sent from my GT-I9195 using Tapatalk
Thanks all, why do they bother with power ratings at all? I've heard amps which are low rated having trouble driving power hungry speakers, but when the opposite is true, would there be any adverse reactions such as harshness or whatever.
Surprisingly, it’s a lot easier to damage speakers with a low-power amplifier than with a high-power one, because clipping produces a lot of HF energy which can kill the tweeters.
I did this in my youth... twice :D
And I knew the only person to blow a pair of GS401a with too much music power (that from the factory in Mayfair). Takes application but quite possible!
Blowing a speaker or just a tweeter by unplugging an RCA or just an earth issue is near impossible with low power amps, but easy with over power amps. It is perceived as stupidity though so not often admitted to.
Sent from my GT-I9195 using Tapatalk
That wasn't the point James. I've also known speakers blow, but not because of an underpowered amp.