PDA

View Full Version : Set of bronze weights for a Zeta Tonearm and a replacement knob for a Pioneer TT



Magna Audio
01-02-2018, 21:08
First up a set of counterweights for a Zeta tonearm in bronze. These are to add greater balancing range to the counterweight
shell / carrier into which they bolt.


https://uploads.tapatalk-cdn.com/20180201/c6b56b56d9b2a535f5b974fbb252aaed.jpg

Then a replacement aluminium knob for a Pioneer turntable.
The new one is on the right.

https://uploads.tapatalk-cdn.com/20180201/48b03f53ee80533fe8d25256f1f5cbd0.jpghttps://uploads.tapatalk-cdn.com/20180201/8ab6c1fa2199c5ecc6830dbe8851c08c.jpghttps://uploads.tapatalk-cdn.com/20180201/e4690fa8a9bb93bcdcfa73ed9e374fb0.jpg

Magna Audio
20-02-2018, 16:43
Ebony headshell spacer pieces made for Montesquieu.
They don't look like much but he was looking for a specific thickness, thinner than others available and keeping it as light as possible.

Of course being ebony they'll sound divine :)

Shown in my test headshell and then installed in Montesquieu's headshell with the SPU Royal N

https://uploads.tapatalk-cdn.com/20180220/d0e4f9472244b47a7d125f5c5b1f2142.jpg

https://uploads.tapatalk-cdn.com/20180220/76b838d2776e83ee48158b55d6cb3a0f.jpg

https://uploads.tapatalk-cdn.com/20180220/042ddf7ef501b315757894e9ffe74368.jpg

https://uploads.tapatalk-cdn.com/20180220/ab21b2cfdec138d6889fd2268e01c2b5.jpg

https://uploads.tapatalk-cdn.com/20180220/05ce0239c6bcfa62c4d39a12ba9c15f1.jpg