PDA

View Full Version : The Techiepedia



Pages : [1] 2 3 4

  1. Calling all SL-1200/1210 owners!
  2. Headshell 'rolling' with the SL-1210
  3. Alignment protractor for technics 12**
  4. Fitting a KAB PS-1200 to a Technics SL-1210
  5. KAB-modified SL-1210 vs. Slatedeck SP10 - a review
  6. Tim's SL-1210 adventure
  7. Arm height locking lever on SL-1210
  8. Great place for Technics SL-1210 spares
  9. 'Plinthing' a Technics SL-1200/1210
  10. DIY power supply for Technics SL1200/1210
  11. 1210 tonearm fitting
  12. 1210 arm choices
  13. Getting Ready for my KAB 1210
  14. The SL1200 Chronicles
  15. 12 and proud
  16. Garrard 401 Vs Technics 1210
  17. SL-1200/10 mat thickness and cartridge height
  18. Gromit's Tecchy Blog
  19. SL-1210 upgrade path
  20. Technics SL1210 Mk5G Advice... Please
  21. Sound Hi-Fi 1210 - First Impressions
  22. Mats for the 1210...
  23. Improving the VTA adjustment on a Technics SL12x0
  24. 1210 armboard position
  25. Timestep psu for the SL1200
  26. Foculpod v Isonoe Feet
  27. Isonoe Feet
  28. Peter's Technics SL-MCCXIV thread (SL1210 + SME IV)
  29. Mono cartridge on SL1200
  30. SL1210mk2 for beginners
  31. Shuggie's SL-1210 Blog Revived
  32. Sorbothane Puss in Boots? ( sneaky SL-1200 thread )
  33. Jason's Techy T/T blog and the arrival of the Jelco 'big boy' c/w
  34. Using a Denon 103R with the stock Tech SL1210M5G Arm
  35. 1210 - A deck odyssey
  36. Coverting a KAB PSU from 220V to 120V input
  37. Joining the 1210 fun
  38. Technics SL1210 with Paul Hynes power supply.
  39. Technics SL12xx & 12" Arms.
  40. How much torque does a 1210 have - check this out!
  41. Audio Origami and the standard Technics arm.
  42. If it wasn't for Marco
  43. technics tt advice wanted
  44. Technics SL1200 plinth damping
  45. Where my Technics T/T journey started...
  46. KAB/Technics SL 1200 mk5
  47. the one that started it all!
  48. Just how knackerd is too knackerd (1210's)
  49. My new sl1210
  50. 1200 which PSU & which arm comparisons
  51. Service/Maintain a 1210?
  52. Techy SL1200 Phono Lead Help, Please.
  53. Is it an infection?
  54. Roksan tabriz arm on my sl1210??
  55. Technics Bearing Mod
  56. timestep fitting questions
  57. a quick note on the timestep
  58. Buy a Technics SL-1200 or Renovate Garrard 401/SME 3009
  59. When does the SL-1200 become too expensive?
  60. Urgent - techie wiring help please
  61. Techie SL1200 Spares.
  62. Steve's SL-1210 new journey - long but stick with it
  63. Technics SL-1200/10 record weights / clamps
  64. 1200 which PSU comparisons [Part 2]
  65. Calling All Upgraded Technics Owners
  66. So tell me about these Technics TT's
  67. The next step for my Techie - Advice needed.
  68. Has anyone ever re-plinthed an SL-1200 or 1210?
  69. SME 309 on a Technics 1200
  70. SL-1200MK6, one for Marco?
  71. sl1210 with ittok???
  72. SL1200/1210 production to cease?
  73. DIY SL-1210 Foculpod feet that do stay put
  74. technics SL-1210 DIY pocket money upgrades
  75. SL1210 - Nearly there.....
  76. Bling bling! Pimp my techy
  77. The Timestep Bearing
  78. Marantz SL-1200 clone
  79. Technics Cartridge Problem
  80. Mike New Technics Bearing.
  81. Advice for new Technics SL-1200 Mk2 Owner
  82. The Mike New Technics Bearing
  83. MM Cart for SL1200 MK2
  84. My new Techie Sl 1200
  85. SP-10 vs SL-1210 round II
  86. My SL1210
  87. Good grief! How noisey is the stock Techie power supply?!!
  88. 1210 MK II tonearm change out Help!
  89. Timestep PSU + Jelco 750 + Squidgie Feet + Wall Shelf + WOW!!!!
  90. Mission 774LC on Technics SL-1200Mk2
  91. VTAF for Jelco SA-750D on SL-1210
  92. Technics SL-1210 mk2 - Setup Advice Pls!
  93. Bit of an Odd one this... (1210 related)
  94. Technics 1200 and Rega 301
  95. Zu Denon and the Technics TT
  96. How about this SL1210 combo?
  97. Stuff the SL-1200
  98. Am i going in the right direction with my 1210?
  99. SME 309 for my 1210
  100. Erm, Another 1210 Query Thread...
  101. ***Why Technics?***
  102. The madness has begun
  103. Timestep vs Mike New - opinions?
  104. SL1210 Platter 'wobble'
  105. Supporting the SL-1210
  106. New mat for my technics
  107. Uber 1210 required for TT bake-off!
  108. LP clamp shootout! - on a Techie 1210
  109. PSU for SL-1210 with pics
  110. Dynavector DV507-II on Technics SL-1210
  111. Sorbothane Boots for SL1200
  112. Sl1210 going blue - a question and a protest
  113. A Kind of Blue and a bit Mike New - Changing my top plate and bearing
  114. Another view on the Techie
  115. Techie SL12xx pcb identification?
  116. SL 1210 headshell/cartridge combo
  117. My Technics 1200 journey
  118. Denon dp 1300mk2 vs technics sl 1200
  119. Isonoe support feet for technics
  120. TT earth check
  121. Modified SL1200 VTA Mechanism to fit alternative Tone Arms
  122. Starway to (the SL 1200) Heaven
  123. kab pc 1200 RCA Jack plate
  124. New Solid Aluminium Platter for the SL1200
  125. How do you clean your Technics
  126. Audiomod micrometer tonearm on the technics
  127. New Paul Hynes SR5 Power Supply
  128. A battle of D/Ds: Heavily-modified SL-1210 vs. Kenwood L-07D and Nakamichi TX-1000.
  129. Technics Upgrade advice
  130. Mike New Platter for Technics SL-1210
  131. A Dalek joins the Techie Club.....
  132. Sl1210: new feet and mat
  133. Help - techie and herbie mat
  134. Question regarding the TimeStep PSU for the Techie SL-1200
  135. Stock Technics arm with Denon 103
  136. Technics 1210
  137. Another Technics question (or two)
  138. But if you want to avoid heavily DJ used gear, then why go for a tt meant for DJ use
  139. Technics Motor Dynamics Mod
  140. Funk Firm Techie Mods
  141. The Garrard 301 vs 1200 dilemma
  142. Beloved Turntables; Pair of Technics SL-1210MK2s, 1 not powering up?
  143. SL-1200 Platters, bearings, mats and PSU's, cartridges, arms, and more...
  144. Technics sl1210 feet
  145. Technics SL-1210MK5G Headshell weights?
  146. The Mike New Technics bearing
  147. Fitting a timestep psu
  148. How to Connect an External Dc Supply to the SL-1200/1210
  149. Technics 1200/10 external PSU info needed please
  150. EPA 100 arm on Technics 1200/1210
  151. Serious contender for the SL1200 series....
  152. Panasonic officially announces Technics production to end 2010
  153. Platter for my sl-1210
  154. It's now time to ditch your Sound Hi-Fi/Herbie's mats...
  155. Technics 1200 and the Jelco 10" arm?
  156. The earth wire?
  157. Still an SL1200, but a new tonearm flavor...
  158. Revised Mike New platter for SL-1200/1210
  159. Techie ordered... Now which cartridge to go with it?
  160. The $2.95 Technics upgrade
  161. New Technics SL-1210 owner
  162. Mike New platter, Oyaide MJ-12 mat & STB-MS stabiliser arrive at Marco Towers...
  163. best cartridge for technics 1200 - 3-400 budget
  164. Technics armboard source
  165. Cartridge change ideas on 1210 with Jelco 750D?
  166. Removal of the Pitch Control fom Technics 1210
  167. powder coating a 1210 plinth
  168. sme V + cartridge match for 1210
  169. DIY Power Supply for SL1200/1210
  170. Officially a Techie owner now!
  171. Changing the CAPS on a 1210
  172. Origin Live 1200/12110 PSU's
  173. Technics 1210 internal regulation mods
  174. Technics SL-1200/1210.
  175. Techie stock tonearm questions
  176. Mike New platter
  177. What upgrades would you next like to see on your technics 1210?
  178. Origin live arm question - quickie
  179. Mike new plinth????
  180. Techie phase 2.5 mat upgrade
  181. My 1210 has been hot rodded
  182. Anyone using some other kind of oil in the Original Technics spindle ?
  183. Soak testing the MN bearing
  184. Technics 1210 3D CGI Animation
  185. Technics 1210 + Clearaudio Maestro
  186. Classical music and the Technics 1200
  187. 1200 + Grado + External PSU
  188. Me and the 1210 are gunna have us some me time....
  189. Broke my 1210, HELP!!!!
  190. 1210 looses output to right speaker
  191. Memoirs of a new Techie owner...
  192. Marc Phillips of the Anti-Direct Drive League: Does he know his stuff or is he BS?
  193. Oil for the Techy.
  194. Earth wire for SL-1210
  195. Rubato copper mat and stock Techie tonearm
  196. Blown US voltage Technics 1200 - used without stepdown tranformer
  197. Techie stock transformer and hum: two questions
  198. 1210's and Mods...
  199. Plinths and the 1200 / 1210
  200. Technics 12XX: Voltage and current requirements?
  201. The modified SL-1200: understanding the dynamics of 'synergy'....
  202. Vantage Audio upgraded technics bearing
  203. Bake off at Brook Towers
  204. First 1210 upgrade
  205. Zu audio modified technics sl-1200
  206. A big thanks to Mike New
  207. The arrival of a wee brush, and a great tweak for Techy fans...
  208. Introduction and technics turntable mat and feet
  209. Technics Platter
  210. An idea for improving the Techie's stock tonearm
  211. Bye-bye SL-1210... Hello Stanton ST-150?
  212. SL-1210/Jelco SA750D - cartridge choices?
  213. Technics or Tactical Objective
  214. Outer Ring For Technics Deck Advise Please
  215. New acrylic platter for the SL-1200/1210
  216. TT Mat Recommendations
  217. Interesting experiment
  218. Pleasantly surprised
  219. Technics SL 1210 MK2
  220. The TS Evo 1200/10 has been reviewed
  221. Strobe Dots on a Mike New Platter
  222. Jelco vs. SME tonearms on an SL-1200
  223. technics wood edition
  224. State of the art with SL1200/SL1210 mods, and in what order do you get there
  225. Vantage Audio platter upgrade for Technics SL-1210
  226. SL1210 Hum when ground connected but fine when it isn't
  227. jelco 750d/Technics fitting experience?
  228. My mike new bearing has arrived
  229. Sl200 cartridge & arm set up
  230. Bearing examination
  231. Heat shrink on Technics arm
  232. New arrivals
  233. Technics 1210
  234. Starting with a Technics SL-1210
  235. Isolating an SL-1200
  236. Vantage Audio Technics SL-1210 PCB upgrade & PSU
  237. what's wrong with my feet ?
  238. Timestep PSU Modification
  239. Fidelity Audio PSU For Technics Deck
  240. Whats the Most expensive Moving Coil you have on the Stock Techy Arm ??
  241. Record Weights on 1200MK2s: One Man's Findings
  242. PSU's for Technics Deck - Sonic Benefits Please
  243. Dirt cheap external PSU for 1200Mkx
  244. The Mike New Bearing Base Plate
  245. I try a Stanton 520 V3 on my Techy..
  246. Oh Man... it rings like a bell...
  247. Technics armboard weakness
  248. Want to do some Technics 1210 Mk2 upgrades - Where to get tonearm rewired in the U.K.
  249. Technics Power Switch Rewiring with an External PSU
  250. To clamp or not with Achromat? That is the question...